![]() ![]() The latest version of PCIe, PCIe 4.0, has been reported to cause USB bandwidth issues and USB device dropouts on AMD B550 and X570 chipset motherboards. Please check your motherboard manufacturer site for a new BIOS update. BIOS updates containing the new AGESA version is rolling out now. Update: AMD has announced that a new AGESA update, AGESA 1.2.0.2 will fix USB issues on affected B550/X570 motherboards. Those are most often teal-colored.Īdvanced troubleshooting - Set PCIe to Gen3 Try connecting Elgato Facecam to those USB ports as well. Other USB ports, such as USB 3.1 and USB 3.2 are backward compatible and support USB 3.0 devices. Many motherboards have USB 3.0 controllers from different manufacturers, therefore it's worth trying to connect Elgato Facecam to a different USB port, which is internally connected to a different USB controller. Instead, these ports use basic Microsoft drivers which cannot be re-installed. Some USB controllers, such as Intel, do not have separate drivers. Other controllers usually also work fine with Microsoft's drivers. Make sure to install the latest drivers provided by your motherboard or notebook manufacturer for the USB 3.x controller. On some motherboards, these ports may be other colors such as red or yellow. These ports can often be identified by their blue interior color. Setting the format in Camera Hub does not set Facecam to that resolution/frame rate in other applications.Įnsure that the port the Elgato Facecam is plugged into is a USB 3.0 port. This needs to be done in the application in which Facecam is being used. Try lowering the resolution, or frame rate. Lowering the incoming source resolution or frame rate directly results in Elgato Facecam using less USB bandwidth. If both USB ports are occupied by high bandwidth devices such as USB capture devices, external hard drives, webcams, etc the available bandwidth may be used up.Įlgato Facecam sends uncompressed video to the computer. These controllers are used for pairs of USB ports. USB ports are controlled by what is called a USB controller. Please make sure the USB hub is USB 3.0 compatible.ĭisconnecting other devices or connecting them to different ports can help. There could be bandwidth issues if too many devices are connected to the same internal USB hub or controller. Learn here how to switch USB transfer modes.Ĭables for Facecam must conform to USB 3.1 Gen1 (USB 3.0) specifications or higher and support 5Gbps transfer speed or faster. In some cases, switching to the other USB transfer mode can help with freezing issues. The two available modes are bulk and isochronous. USB 3.0 includes two different types of transferring data, known as USB transfer modes. ![]() These steps can be tried when Elgato Facecam video freezes in Camera Hub, OBS Studio, or other software.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |